Medical Reverse Osmosis Systems

Systems designed to produce up to 17 USgpm of purified water registered as FDA medical equipment (510K).

TF Polyamide membranes, stainless steel housing, 1 micron pre-filter, automatic valves, 316 SS multistage centrifugal pump, 3 variable flow meters, recycling pump, programmable auto rinse, Clean-In-Place valves, recovery up to 75%.

SKU: Medical RO Systems Category:

Description

Output from 1.3 gallons per minute (4400M-2K) to 17 gallons per minute (4400M-24K)

Designed to support one to six dialysis machines.

CHARACTERISTICS

Electrical:

  • 115v AC, 60Hz, single phase
  • 0.75hp engine
    Recovery: 75% Recovery: 75% Recovery: 75% Recovery: 75% Recovery: 75% Recovery: 75% Recovery: 75% Recovery: 75% Recovery: 75%
  • Rejection: 95-99% Rejection: 95-99% Rejection: 95-99% Rejection: 95-99% Rejection: 95-99

Water requirements to be fed:

  • TEMP. 2-35 °C
  • INPUT PRESSURE: 30 psig, PH: 2-11
  • MÁXIMO CLORO LIBRE:  < 0.1 ppm, SDI:  < 3, TDS  < 1,000 ppm
  • LANGELIER INDEX <0.5, HIERRO / MANGANESO < 0.1 ppm

Dimensions:

  • 77.5″ HIGH, 38″ WIDE, 29″ DEEP
  • WEIGHT: 395 lbs to 832 lbs.